Everything you need to hook up subs
There is a blue wire with a white stripe hanging out of the back of the deck known as the remote wire. What you need to do is connect the 16 - 18 gauge wire to the correct blue wire.
You want to get this wire to the trunk of the car. Be careful not to give yourself an electric shock because it is quite painful. You could also easily blow a fuse by using the little ones the fuse box has. Don't connect the power wire to the battery or the amp just yet. If you are ready to get a loud car, get a 5 channel amp and some crossovers if your speakers and tweeters are separate.
Step 1: Parts
This is another cost effective alternative to buying a wiring kit, if you know the dimensions of your car. Around the yearthe UK national Fire and Rescue service issued a nationwide advisory about people who have done just this.
There are other ways on doing this but from what I read from your posting, this would be the cheaper way on doing it. Make sure you tape the place where you wired the fuse to the wire, so you everything you need to hook up subs get a short.
I had a few times when I needed to jump my car: Anyways, I'm new here, so I'm not sure how everything works yet, but here's my subwoofer and amplifier installation video that goes very well with your article.
Introduction: Installing Subwoofers in a Car
If you pick a speaker with maximum rated input of Watt to connect it to an amplifier with average output of Watt, then never crank the amplifier to max or you'll end up damaging the speakers. There are many different types of enclosures sealed, vented, bandpass, infinite baffle, etc. I am inpatient and plowed on, but i am glad i did because i now have two amazingly bassey subs in the rear of my Plymouth Voyager i just popped open the side panels and spliced into the two rear speakers yes I'm quite aware that i probably did it wrong.
Phil Dodd author Reply The welds in some such vehicles involved in crashes were found to have spilt along hairline cracks, introduced by the use of subwoofers, or by panels splitting at rust points. There may be 2 channels. I just got 2 subwoofer from a relative and I don't know if they need an external power source, they are "pioneer spare tire subwoofers TS-WX50", also when I plug them in thru my home sterio they seem to work just fine, does anybody know if I need to add external power?