Hook up new faucet
Attach the Flexible Connectors The hot and cold supply tubes on the faucet may vary in length, depending on the brand.
Once you have the new faucet picked out, assemble all the parts you need, and double check so you can complete this at one time and without multiple trips to the hardware store. Next, remove the flexible line from the shutoff valve.
Before beginning, turn off the water at the shutoff valves under the sink Image 1. Pro Tip It's time to connect the new faucet's fittings with the water-supply lines.
It may need some gentle persuasion from years of corrosion or a sticky base gasket. Remove the Old Faucet Step 3: Start by shutting off the wall valves and turning on the faucet to drain hook up new faucet residual pressure. Install New Faucet Step 6: Turn the water on at the shutoff valves, and turn on the faucet to check whether it's working properly. Tighten the connections with an adjustable wrench. Use a small adjustable wrench to disconnect the hot- and cold-water supply lines from the shutoff valves Image 2. Assemble the hot and cold mixing valves.
Inspiration. Ideas. How-To Advice.
Twitter Facebook Pinterest Instagram. Generally, from the top down there will be the spout, a gasket or plumber's putty, the sink or countertop, a large washer or saddle, and a mounting nut.
You may want to attach flexible connectors to adapt the faucet for a particular installation. How to Repair a Leaky Spigot 9 Steps. Save yourself from struggling in cramped quarters by making all the connections you can before setting the new assembly in place.
Install New Faucet Faucets can vary greatly among manufacturers, so consult your installation manual. One added benefit of separate mixing valves is that most manufacturers use one valve with many different trims. Holmes and Holmes Tips and How-tos 5 Videos.
Installing the new faucet
Bathroom How Tos 6 Videos. Attach the second flexible connector if you haven't already Image 1and attach the male ends of the connectors to the shutoff valves Image 2.
Tighten the Connections Attach the second flexible connector if you haven't already Image 1and attach the male ends of the connectors to the shutoff valves Image 2. How to Repair Faucets.
Disconnect the line that connects the hose to the faucet, if your sink has one. Also, you should know that different faucets may have different configurations. Remove the Old Faucet Using a basin wrench, reach up behind the faucet, and unscrew the coupling nuts connecting the supply tubes to the faucet figure 1.